Boîte coeur...
Elle n'est pas grande, pas petite non plus....
on peut la décliner en lin, en tissu coloré ou classique...
La customiser ou même la broder...
Les grilles de cette dernière sont disponibles sur le site d'Audrey
http://serendipitycie.canalblog.com/
D'abord voici le gabarit
en principe en l'imprimant à l'aide de paint on l'obtient à la bonne taille
le haut du A doit faire: 8,6cm le haut du B: 8 cm
cliquer sur l'image pour l'agrandir et la télécharger
Reporter les gabarits A et B 2 x sur du carton de 2 ou 2,5mm,
et le gabarit A 2x sur bristol ou de la cartonnette
Draw shape A and B twice on thick cardboard and shape A twice on light cardboard
glue thick paper along the hedges of shape A
glue everything together
cut 4 fabric with the cardboard
Stick a small piece of fabric at the tip of the heart shape
Spread
glue on the A shape, stick in on fabric, use the zigzag blades scissors
to cut the fabric around the shape, but not too close as show on the
picture
Glue together both light cardboard A shapes, fold the hedges as shown on picture, stick on the B part of the box. Fold back the heart and all the upper parts and the foot….
Même chose pour la 4 ième face voici la première partie terminée!
Découper dans du carton 2,5 mm
1x: 7,2x7,2 cm
2x: 7,2x8,8cm
2x: 7,6x8,8cm et assembler pour obtenir une petite boîte
Habiller l'extérieur et l'intérieur
Use fabric or paper to cover the central box. Use colours that will stand out from the ones used for the outside parts.
This part does not have to be perfectly finished as all the difficult parts will be hidden in the end
La finition n'a pas grande importance toutes les parties "sensibles "seront cachées....
Merci à IsaE pour les traductions anglaises...